Matt Straight Edge Trim 2.5m

A high-quality matt straight edge trim, measuring 2.5m in length. Ideal for protecting and finishing edges and tiled corners, whilst also providing a decorative finish.
This is an ideal trim for use in dry areas with a low moisture exposure.
Available with internal heights of: 8, 10, 12.5mm
Product Codes: 4468, 4470, 4472

Description

This aluminium matt straight edge trim is designed to provide both protection and a neat finish to tiled corners and unfinished edges. With a length of 2.5m and a variety of internal heights ranging from 8mm through to 12.5mm.

Usage

This particular aluminium tiling trim has a natural matt mill finish, and is manufactured using a primary allow which is ideal for the complex extrusion process. This ensures the trim benefits from a high tolerance, making it ideal for use where a high level of protection is required.

Although, the natural mill finish is not suitable for exterior use as it will be susceptible to atmospheric corrosion. Instead, this trim is perfect for internal installation within areas which a low moisture exposure.

Installation

As you would expect from a high-quality Atrim tiling trim, this matt straight edge trim features a perforated anchoring leg which will help to secure the trim to the adhesive or mortar below the tiled surface. Once installed, the matt finish will create a uniform finish, however care should be taken to prevent damage of the trim from tile adhesive, mortar or other grouting products, with setting materials removed from the area quickly.

Maintenance

These aluminium trims do not require any special maintenance, with a soft cloth and water ideal for removing general marks and cosmetic issues. A glass cleaner or mild detergent can also be used to remove stubborn stains and fingerprints. If an oxidation film builds up on the trim, it can be easily removed with common polishing agents. However, if the surface of the trim is damaged a recoating layer can be applied to provide added protection.

Additional information

Internal Height mm

10mm, 12.5mm, 15mm, 18.5mm, 18mm, 20mm, 22.5mm, 22mm, 25mm, 3mm, 4.5mm, 6mm, 8mm