Raimondi Tall Levelling Clips for Tiles of 12-20mm Thickness

The Raimondi tall levelling clips are perfect for professional tilers thanks to their excellent performance and ease of use. These clips are designed to be used with tiles that are between 12-20mm thick, where they will help to level even the heaviest of tiles, so not only will tilers benefit from a professional finish but the installation process will also be much faster.

Size: 1.5mm width – for use with tiles between 12-20mm thick.

Quantity: 400 pack

Product Codes: 1224

Downloads

Description

How to create the perfect finish with levelling clips

Step 1
Spread the tile adhesive and lay the tile, then position the Raimondi clips beneath the edge of the tile. The clip will act as 1.5mm spacer when pressed firmly against the tile

Step 2
Set the adjacent tile firmly into the adhesive, butted against the Raimondi clip. Then slide the Raimondi wedge through the clip until both tiles are firmly levelled.

Step 3
Once the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joint width can be adjusted slightly during setting, without disrupting the height of the tiles.

Step 4
Once the adhesive is set the wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile ready for grouting.