Description
LTP Ironwax Gloss – Interior Stone Surface Sealer with Self-Shine Finish
Protect and transform your interior stone surfaces with LTP Ironwax Gloss, a professional-grade, film-forming acrylic sealer that leaves a long-lasting, self-shine gloss finish. Specifically formulated for interior use, this sealer is perfect for travertine, slate, limestone, sandstone, brick, terracotta, unpolished marble, porous quarry tiles, terrazzo, and concrete surfaces.
LTP Ironwax Gloss enhances the natural tones and textures of stone while forming a resilient protective layer that resists stains, dirt, and wear. It’s easy to apply and maintain, making it ideal for both domestic and commercial settings—however, it is not suitable for wet rooms or shower enclosures.
Whether you’re sealing a rustic brick floor or revitalising honed limestone tiles, this versatile gloss sealer delivers a professional finish that’s hard-wearing and low maintenance.
Application Instructions:
-
Ensure surfaces are completely clean and dry (minimum 24 hours)
-
Avoid shaking the bottle to prevent frothing
-
Rough surfaces (e.g. riven slate): Use a sponge or brush to apply 3 thin coats in alternating directions
-
Smooth/honed surfaces: Use a sealant applicator pad or J-cloth to apply thin coats without rubbing
-
Allow each coat to dry for at least 1 hour
-
Maximum 6 coats for a higher gloss finish
-
Avoid over-application to prevent unsightly build-up
Coverage: Approx. 15–30m² per litre per coat (depends on surface porosity)
Curing Time: Touch-dry in 1 hour. Fully cured & water-resistant in 3 days
Maintenance: Use LTP Floorshine for regular cleaning. Use LTP Grimex to strip if re-sealing is needed
Note: Not recommended for highly vitrified quarry tiles or ceramics. Always test before full application.
