Description
LTP Ironwax Satin – Satin Finish Surface Sealer for Stone & Tile
Create a beautifully smooth, natural look with LTP Ironwax Satin, a film-forming acrylic sealer specially formulated for use on porous interior surfaces such as travertine, limestone, slate, brick, unpolished marble, terracotta, and concrete.
This self-shine, satin finish sealer enhances the natural appearance of your stone while offering long-lasting protection against stains, dirt, and wear. It’s ideal for both domestic and commercial interiors where a softer, low-gloss finish is desired.
Note: LTP Ironwax Satin is for interior use only and is not suitable for wet rooms or shower areas.
Application Guide:
-
Make sure the surface is completely clean and dry (minimum 24 hours drying time).
-
Rough or riven surfaces: Apply 3 thin coats with a sponge or brush, each in alternating directions.
-
Smooth/honed surfaces: Use a J cloth or applicator pad to evenly apply 3 coats without buffing.
-
Each coat dries in about 1 hour. Up to 6 coats may be applied for a higher sheen.
-
Do not over-apply; excessive layers may cause cloudiness or reduce effectiveness.
-
Full hardness and water resistance is reached in 3 days.
Coverage:
15–30m² per litre (depending on surface type and porosity)
Maintenance Tips:
-
Use LTP Floorshine for regular cleaning
-
Reapply Ironwax Satin where wear is visible
-
For a full refresh, strip with LTP Grimex before re-sealing
